2018 is the final year for production with Tier 3 engine in the U.S. and Canada. Visit https://www.bergkampinc.com/news/2018-truck-mounted-paver-last-year to request more information.
The M310E Truck-Mounted Paver has the same proven design, efficiency, and productivity of the M310 Paver, minus the side engine.
Customers needed a paver that met strict emission standards and would pave at an optimized rate. Bergkamp responded with the M310E that delivers precision control of the mix ratio with the EMCAD System and eliminates the need for a side engine.
The M2 Series is a proven design with convenient control locations and good operator visibility. Versatile design allows customer to choose the size of the unit that best fits their needs.
International Offering Only Not Available in the United States or Canada.
The new Bergkamp Mobile Stockpile revolutionizes the process used by truck-mounted slurry seal and micro surfacing pavers. A fully mobile material transfer and storage trailer, the Mobile Stockpile connects to and replenishes your truck-mounted pavers with aggregate and asphalt emulsion on the job site.
By bringing your stockpile on-site, you can take advantage of a process change that will allow you to eliminate driving long distances to stockpiles, avoid overweight citation risks, require fewer pavers, and reduce stockpile coordination issues.
Bergkamp offers mobile support units for our M1 full-size continuous slurry seal and micro surfacing paver. By using multiple support units you can provide a constant supply of material to the M1 – helping reduce construction joints while increasing productivity.
The MS13 can hold 560 gallons (2,120 liters) of Asphalt Emulsion.
The MS21 can hold 1,000 gallons (3,785 liters) of Asphalt Emulsion.
Located at the back-right side of the hopper body, an air tack hose system with 180º pivot capability to provide approximately 20-feet overall reach and locks in position when the system is fully extended. The system is designed to suspend the hoses, keeping them off the street. Swings forward parallel to the hopper, with spring-loaded lock pin for transport position. Air system is used for repair site preparation, keeping hoses off the repair and the street.
Keeping an eye on traffic and your crew can be difficult, but with the optional 360 Degree Back-Up Camera and Rear Camera option, the driver can see all the way around the patcher. This option can be retrofitted to existing patchers. Contact Sales to get a quote on this valuable safety option.
Three of our most popular options are pictured below. Contact Government Sales today to discuss the options available so that your crew is safe while working in the field.
Lighting options can keep the patcher and your crew visible to oncoming drivers. Bergkamp offers many different types of lighting and your sales representative can help you choose the options that are best for the conditions your crew patches in the most.
The FP5 employs the InPave® Technology to monitor production, performance, and location of each pothole patcher and crew. As potholes are repaired, data is automatically transmitted back to the office for analysis. InPave® Technology provides an easy way to monitor production, performance and location of each pothole patcher and for government agencies or contractors
The SP5 employs the Bergkamp InPave® Mobile Technology Pothole Patching Management System to monitor and manage pothole patching performance for government agencies and contractors. InPave Technology provides an easy way to monitor production, performance, and location of each pothole patcher and repair. As potholes are repaired, data is automatically transmitted and easily downloaded.
The mill for polymer modification of asphalt is designed on the basis of DenimoTECH’s 30 years experience in the asphalt industry.
Better mills make better products. Success is in the particle size — the particle size distribution of the emulsion is critical to its storage stability. It also directly influences the emulsion viscosity and breaking behavior. In high asphalt content emulsions, like those used for surface dressing, the asphalt ratio can be optimized for a given viscosity specification. For applications such as slurry surfacing, a smaller particle size significantly improves the breaking performance.
With DenimoTECH’s precision equipment, you can manufacture products for a number of applications meeting all requirements related to road conditions and climate challenges.
Inline systems give great flexibility during production. Flows for water and chemicals into the bitumen are controlled individually and can be changed during production. All chemicals and water are added continuously during production, instead of having to pre-mix, therefore it can run continuously without stops and starts.
DenimoTECH’s newly designed 12t/h semi-automatic batch plant arrives fully assembled with all equipment mounted in one space saving 20″ container with easy access to control devices and process supervision. This containerized version is therefore ideal for the busy road contractor or manufacturer who can’t afford installation and set up time.
This plant is conveniently mounted on a space saving frame, with all controls mounted on a single panel on the frame. This plant is not only reliable, at the same time it is one of the most environmental friendly on the market. There is no material waste and no energy is used to cool the water. One person can operate the plant including sampling and production testing, loading and unloading raw materials. Production capacity available from 12-40 ton/hour.
Our batch asphalt emulsion plant is a ready-to-go unit for simple emulsion production. This plant is delivered fully assembled and ready to start production. Production capacity from 3 – 30 t/h. On our two smallest versions of this Economy plant, installation in a 10″ container comes as an option.
The DenimoTECH asphalt emulsion and PMB research plant provides manufacturers with a platform to test, improve, and design recipes for any type of project.Our research plant is capable of producing cationic, anionic and non-ionic emulsion at a maximum capacity of 300 l/h.
The CST-1 is a chemical storage tank used for storage of emulsifier. Ready for installation, the tank is mounted on skid, and comes with an electrical heater, thermostat, insulation, agitator, local control panel and minimum level sensor for automatic stop of heating and agitator.
Bergkamp Bituminous Solutions markets, sells and supports a full range of emulsion mills and plants, polymer-modified asphalt blending mills and plants, crumb rubber blending plants, laboratory plants, storage tanks and mixers.
Looking for more information? We offer a wide variety of literature - these documents are available as PDF downloads upon request — we’ll send the appropriate file straight to your inbox!
Bergkamp provides pothole patching solutions such as the FP5 Flameless Pothole Patcher, as well as, the SP5 Spray Injection Pothole Patcher.
Bergkamp is an industry leader with machines that are well known for quality and performance. Please check out our full line of slurry seal and micro surfacing equipment.
Download these important tips and share them with your crew. Look for more Tech Talk’s from Bergkamp Customer Solutions each month.
5 Ways to Keep Your Paver Running Cool