M310 Tier 3 Engine Pavers are only available outside the U.S. and Canada. 2018 was the final year for the production of Tier 3 Engine M2 and M3 Series Pavers. Click Here to learn more or request more information.
M310E with EMCAD - Tier 4 Truck - No Side Engine
Completing paving projects faster and maintaining the same mix ratios for a better finished product is what you get with the M310E Slurry and Micro Surfacing Paver. Bergkamp’s advanced M310E slurry seal and micro surfacing paver takes environmentally friendly pavement maintenance to a whole new level.
Tier 4 Compliant, Truck-Mounted Paver with No Side Engine
The M310E Truck-Mounted Paver has the same proven design, efficiency, and productivity of the M310 Paver, minus the side engine. Because there are fewer emissions, less maintenance, and mix ratios are computer controlled with our proprietary EMCAD (Electronic Mix Control and Diagnostic) System Technology, this is the most advanced paver in the industry that meets environmental requirements for Tier 4 engines.
This is a great machine. Easy to use and user friendly.
Rating: 5 5 /5 stars
Salvador Reynagaon 2019-01-22 21:00:59
I like the machine a lot it makes your job much easier.
Rating: 5 5 /5 stars
Fidel Vallesteroson 2019-01-22 20:57:08
The best machine ever made, up grades are getting better
Rating: 4 4 /5 stars
Derek Lovelady, Operatoron 2018-08-28 15:06:22
I like the slurry machine we got from you guys. Works a lot better than the last one we had. Things are much easier and smoother.
Rating: 5 5 /5 stars
Jeff Gibson, City of St. Josephon 2018-08-28 14:30:54
We've been very satisfied with our M3. We laid 20 miles last year with very few issues. Planning to get 20 this year as well.
How important is maintaining the same mix ratio while you are paving to your bottom line?
Maintaining the precise bid specified mix ratio and delivering a product that is consistent from the first pass to the last is vital to your success. Stop pouring your profits into the mix and be sure the same percentage of emulsion, aggregate, and fines are precisely calculated by our EMCAD System. Don’t just monitor the mix, CONTROL it.
Using the EMCAD system, an operator can precisely monitor and control the percentage of materials and maintain the correct mix design you promised to deliver to the customer. The quality of the mix determines the quality of your work, so make sure you control the mix and your profitability.
These videos below demonstrate the easy to read input screen of the EMCAD System and features like the tarp and slide out pug mill.
The EMCAD (Electronic Mix Control And Diagnostic) system also simplifies and shortens calibration time due to its fixed aggregate gate. The EMCAD easy to use touch screen walks the operator through the calibration steps, makes all calculations, and stores multiple material calibrations in its memory.
After calibration, the computer continuously calculates the material ratios and controls them to precisely maintain the exact specifications of your mix design regardless of the speed of the truck. The result is a consistent mix to your specifications throughout the entire paving job. By controlling the mix ratios, EMCAD eliminates the risk of using too much emulsion which decreases profitability and ensures a consistent, delivered product your customers can count on.
If you require a printed report of the materials your paver used, no problem! EMCAD monitors and reports on daily production rates. Using the on-board radar the EMCAD system provides distance paved and uses operator paving width inputs to calculate actual application rate and area covered. All daily report information can be printed using the on-board printer. Control and convenient reporting in one system; EMCAD System Technology gets you paving quickly and keeps you paving consistently.
The EMCAD diagnostic features allows for quick field troubleshooting of electronic and hydraulic components, as well as, providing plain language error codes from the Cummings engine. No more prodding and poking with meters to determine where your system is down. With our diagnostics, your crew can quickly determine what needs to be repaired and get your paver back to work.
EMCAD (Electronic Mix Control and Diagnostic) system provides accurate information on the M310E’s performance, and includes:
Current and average material ratios
Total materials used
An end-of-day printout of material usage
Inline asphalt emulsion strainer system removes impurities and helps produce a higher quality product
A Tri-Rotor pump makes loading asphalt emulsion faster and easier
Slide-out pugmill improves access and makes cleanup and maintenance easier